Yealink W52P Configuration Manual

Also see for Telkom W52P: Auto provisioning guide Getting started Recovery guide Deployment guide Quick installation guide

Yealink W52P Configuration Manual Manual pdf 35 page image

Basic Operations23To configure a static IPv4 address via CommPortal phone configurator:1. Click on Network >IP Setting.2. Select Static IP Address from the Internet Port Type for IPV4 pull-down list.3. Enter the desired values in the Static IP Address, Subnet Mask, Gateway, PrimaryDNS and Secondary DNS fields respectively.4. Press the Save soft key to accept the change.5. Perform auto provisioning on the phone to download above configurations. Formore information on how to perform auto provisioning, refer to DownloadingConfiguration Files on page 17.NoteSIP session timers T1, T2 and T4 are SIP transaction layer timers defined in RFC 3261.These session timers are configurable on IP phones.Timer T1Timer T1 is an estimate of the Round Trip Time (RTT) of transactions between a SIP clientand SIP server.Timer T2Timer T2 represents the maximum retransmitting time of any SIP request message. There-transmitting and doubling of T1 will continue until the retransmitting time reaches theT2 value.Wrong network settings may result in inaccessibility of your phone and may also have animpact on your network performance. For more information on these parameters,contact your system administrator.