Yealink W52P Full User Manual

Also see for Telkom W52P: Auto provisioning guide Getting started Recovery guide Deployment guide Quick installation guide

Yealink W52P Full User Manual Manual pdf 11 page image

© Gamma 2014. All rights reserved. Confidential.Auto AnswerWhen auto answer feature is enabled, you can simply answer the incoming calls by picking up the handsetfrom the charger cradle without having to press the off-hook key. The auto answer feature works only if thehandset is placed in the charger cradle.Auto IntercomThe handset can automatically answer an incoming external intercom call and play warning tone only whenthere is only one handset subscribed and no call in progress on the handset.To automatically answer an incoming internal intercom call, you need to enable auto intercom feature onthe handset. The following configuration types of auto intercom feature are available for selection: On (Beep On): Auto intercom feature is on. The handset will answer an incoming internal intercomcall automatically and play a warning tone. On (Beep Off): Auto intercom feature is on. The handset will answer an incoming internal intercomcall automatically without a warning tone. Off: Auto intercom feature is off. You need to answer an incoming internal intercom call by pressingthe Accept soft key.Speed DialSpeed dial allows you to perform single-digit dialling to predefined numbers. You can assign the importantnumbers of your local directory to the speed dial keys of your handset.Handset ResetYou can reset individual settings that you have made on the handset. Resetting handset will not overwritesettings of directory, call history, voice mail and the handset registration to the base station.Eco ModeEco mode greatly reduces the transmission power and signal output when the phone is in the talk mode.The attenuation range is 20m. When the distance between the base station and the handset is over 20m,the eco mode is disabled automatically.Repeater ModeRepeater mode extends the radio coverage of the base station. The repeater has the same radio coverageas the base station. This feature is especially useful for users who require mobility in large areas. If therepeater mode is enabled, and a repeater is registered to the base station, the handset registered to thebase station can be used either in the base station or the repeater coverage area, thereby providing userswith greater freedom in mobility. Later on we will explain how to use the repeater with the base station.Handset NameThe handset will be assigned a name by default if successfully registered to the base station (i.e. H1, H2etc). You can personalize the handset name.