Yealink W52P Full User Manual

Also see for Telkom W52P: Auto provisioning guide Getting started Recovery guide Deployment guide Quick installation guide

Yealink W52P Full User Manual Manual pdf 8 page image

© Gamma 2014. All rights reserved. Confidential.StatusYou can view the system status of the base station and the handset. Below is the available information: Base Station Status: Information about the IP Address, Mac address, Firmware version and networksettings will be included Handset Status: Information for the hardware version, model, IPUI code and firmware version of thehandset can be found Line Status: You can check the status of the lineIntercomUsing this feature you can make internal calls to the other handsets that are registered under the samebase station.Voice Mail Play Message: You can access your voice mail system Set Voice Mail: It is not recommended to make any changes on the voice mail settings Set Key 1: By default if you press the key 1 you will call to the voice mailCall Features Call Forwarding: There are 3 call forwarding types Always Forward: Incoming calls are immediately forwarded. Busy Forward: Incoming calls are immediately forwarded if the line is busy. No Answer Forward: Incoming calls are forwarded if not answered after a period of time. Do not Disturb: If the DND is enabled all the incoming calls will be rejectedDirectoryYou can configure up to 500 local contacts. All the contacts will be saved on the base station. Currentlyonly the local directory is available. Note: LDAP-Corporate directory search is not available on this particulardevice.