If there is only a call on hold, press the sof t key .Press the sof t key during a call , and select .If there are two calls on hold, press the sof t key to resume the current call,press the sof t key to swap between the two calls.You can transfer a call in the following ways:1. Press the sof t key during a call, and select .1. Press the sof t key during a call, and select .1. Press the sof t key during a call, and select .2. Enter the number you want to transfer the call to .3. Press the sof t k ey to dial out.Incoming calls are for warded immediate ly.Incoming calls are for warded when the handset is busy.Incoming calls are for warded if not answered after a period of time.1. Press the k ey to enter the main menu, and select -> .3. Press or to highlight the desired forwarding type, and press the sof t key.5. Enter the number you want to forward the incoming calls to in the field.7. Press the sof t key to accept the change.2. Enter the number you want to transfer the call to .4. Press the sof t key when you hear the ring-back tone.3. Press the sof t key.2. Enter the number you want to transfer the call to.3. Press the sof t key to dial out.4. Press the sof t key after the call is answered.2. Press or to highlight the desired line, and press the sof t key.4. Select from the field.6. Press or to select the desired ring time to wait before forwarding (only for NoAnswer Forward) in the field.Press during a call to mute the call.Press again to un-mute the call.Applies to firmware version 30 or later.5G Communications Ltd.Support: 01494 817 817, Sales: 01494 523 523Phoenix House, Desborough Park Road, High Wycombe, Buckinghamshire,HP12 3BQinfo@5gcomms.com | www.5gcomms.com