Yealink W52P User Manual

Also see for Telkom W52P: Auto provisioning guide Getting started Recovery guide Deployment guide Quick installation guide

Yealink W52P User Manual Manual pdf 40 page image

404. Phone settings.4.18 Incoming lines. After the handset is registered to the base station, you can assign one or more incominglines for the handset. The handset can only receive incoming calls of the assignedincoming line(s). You can assign incoming lines to all handsets registered to the samebase station on your handset.To assign the incoming line tohandsets:1. Press to enter the main menu.2. Select ->Telephony->Incoming lines.3. Enter the system PIN (default: 0000).4. Press the Done soft key.The LCD screen displays all handsets registered to the base station. The handset itself ishighlighted and followed by a left arrow.5. Press or to highlight the desired handset, and press the OK soft key.6. Press or to select Accept from the desired line fields.7. Press the Save soft key to accept the change.8. Press the Back soft key to return to the previous interface.9. Repeat steps 5-8 to assign incoming lines for other handsets.If a line is assigned to multiple handsets as an incoming line, an incoming call to this linewill cause these handsets to ring simultaneously, but the incoming call can be answeredonly by one of them.Assigning a speed dial number. You can assign the important numbers of your directory (including local directory,remote phone book and network directory) to the speed dial keys of your handset. Thishelps you dial a contact quickly and easily by long pressing the speed dial key withouthaving to enter the directory. The available speed dial keys are the digit keys 2-9.4.19 Speed dial. Speed dial allows you to perform single-digit dialling to predefined numbers. Thisfeature is particular useful to users who dial certain numbers on regular basis. Amaximum of 8 speed dial numbers are allowed.To assign a speed dial numberfrom the directory:1. Press to enter the main menu.2. Select ->Telephony->Speed dial.The LCD screen displays all available speed dial keys.3. Press or to highlight the desired speed dial key, and press the Assign softkey.4. Press or to highlight the desired directory if there are multiple directories.5. Select the desired contact from the directory.6. Do one of the following:- If only one number is stored for the contact in the selected directory, press the OKsoft key to assign the number to the selected speed dial key.- If both the office number and the mobile number are stored for the contact in theselected directory, press the OK soft key to display the two numbers.Press or to highlight the desired number.Press the OK soft key to assign the number to the selected speed dial key.