Yealink W52P User Manual
Also see for Telkom W52P: Auto provisioning guideGetting startedRecovery guideDeployment guideQuick installation guide
                                                       | |
Contents
| 
444. Phone settings.To configure the repeatermode:1. Press to enter the main menu.2. Select ->System settings->Repeater mode.3. Press the Change soft key to check the Repeater mode checkbox.The LCD screen prompts “Are you sure you want to reboot the base station?”.4. Press the Yes soft key to reboot the base station.The base station reboots to make the configuration take effect. The configurationapplies to all the handsets registered to the same base station.4.27 Repeater mode. Repeater mode extends the radio coverage of the base station. The repeater has thesame radio coverage as the base station. This feature is especially useful for users whorequire mobility in large dwellings. If the repeater mode is enabled, and a repeater isregistered to the base station, the handset registered to the base station can be usedeither in the base station or the repeater coverage area, thereby providing users withgreater freedom in mobility.Please note:Repeater mode and eco mode+ cancel each other out. These two features cannot be used at the same time.To use repeater mode, make sure both the base station and handset are upgraded to the latest firmware version (x.30.x.40).. |
Related manuals for Yealink Telkom W52P
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine