Yealink W53 and W60 Quick Start GuideDialling NumbersThere is no need to dial ‘9’ for an outside line if you previously had to.Dial the number (including area code) on the handset then pressthe key or the green button .To end the call, press the red hang up button .Open Transfer(Transfer a call with announcing)1. Answer the call using thegreen button .2. Press the ‘TRAN’ button.3. Dial the extension you wish totransfer to or select from ‘Directory’.4. Press either the key or the greenbutton .5. Wait for colleague to answer.6. Press either the ‘TRAN’ key or the‘Transfer’ soft key to send the callto colleague.7. If your colleague is unavailableyou can bring the call back to yourhandset by pressing the ‘Back’soft key.Transferring CallsBlind Transfer(Transfer a call without announcing)1. Answer the call.2. Press the ‘TRAN’ key.3. Dial the extension you wish to transferthe call to or select from ‘Directory’.4. Press either the ‘TRAN’ key or ‘Transfer’soft key.On Hold1. Answer the call.2. Press the ‘Option’ soft key.3. Select ‘Hold’.4. To bring the call back press the‘Resume’ soft key.DND (Do Not Disturb)1. Press the button.2. Using the arrow buttonsscroll to ‘Call Features’ .3. Select ‘Do Not Disturb’.4. Select your user.5. Using the arrow keys scrollleft or right to enable ordisable ‘Do Not Disturb’.6. ‘Do Not Disturb’ enabled willbe indicated by a symbolat the top of the screen.*Please note placing your phone on ‘Do Not Disturb’will send all calls that come to you straight to yourvoicemail. If a call comes in to a group that you area part of and everyone in that group is on DND, thiswill send the call to the group voicemail.123