Yongnuo YN-622C User Manual

Also see for TOYUG YN-622C: User manual User guide User guide Quick start guide

Contents

Yongnuo YN-622C User Manual Manual pdf 17 page image

The Other YN-622C User Guide28/08/2013 Page 17 of 23CAMERA FEATURESAmbient-only shot• Turn transmitter off. 622 settings are remembered when powered up again.• Or, use type A camera menu Flash Firing – Disable.High-speed Continuous Shooting• Trigger keeps up with camera. (Tested at 6.5 fps.)• A Flash battery pack is recommended for maintaining flash output consistency.Live View• Silent Mode must not be enabled, as Canon then prevents flash from firing.Modelling Light• Works as designed. All flashes fire, including on-top flash.FLASH FEATURESFlash Zoom (Flash Coverage)Canon provided a flash head zoom to provide lighting just wide enough to cover the lens’s field ofview. Consider the zoom as a light modifier, for efficiency or artistic reasons, or because theflashes may be off-camera and lens zoom is irrelevant. The 622 provides more flexibility thanCanon’s implementation. This may be affected by Canon’s rules - Wide panel extended: 14mm;Head in Bounce on Auto: --mm; Head in Bounce on Manual: as set; Auto-adjust for sensor sizeenabled.Zoom LockAn individual flash under remote control can have its zoom setting locked so that it is not controlledby the camera’s zoom menu setting.• Hold down [CH SET] on a 622 Receiver for several seconds until the channel indicatorstays lit. (This is the same as setting mix control on a transmitter.)• Adjust the flash zoom setting with the flash control panel (automatic or manual).• Hold down [CH SET] for several seconds to cancel. The channel indicator will go out.Zoom and Remote Control• Remote Control – camera zoom settings apply. Auto; Manual 24 to 105mm (or 200mm).• With automatic setting, focal length of the flash may change with lens focal length.• With manual setting, focal length of the flash supports manual setting within 24-105MM.Zoom and Mix Control• The camera’s zoom menu setting is disabled.• Set each flash’s zoom setting on-flash – Auto, Manual 24 to 105mm (or 200mm).LCD display• Flash zoom, focal length, ISO, shutter speed, FE Lock, HSS indicators change withsettings.Pilot Indicator• Individual test fire works.