York HIC4008B21S Installation And Maintenance Manual

Also see for CIC4008B21S: Engineering manual

York HIC4008B21S Installation And Maintenance Manual Manual pdf 40 page image

36 P54170548.12 Setback Operation(1) Press and hold “Menu” and “Back/Help”on the wired controller simultaneously for at least threeseconds during the normal mode (unit stoppage).The Test Run menu is displayed.(2) Select “Input/Output” from the Test Run menu and press “OK”.(3) Select either "Input 1" or "Input 2" and change the setting to "09".(4) Build a circuit such as shown below.(5) Temperature adjustment for the setback function can be selected on the wired controller.Refer to Section 8.11, "Function Selection by Wired Controller" of the manual for details.OKTest Run MenuInput/OutputThermistor SelectionFunction Selection 01/03Test RunEntr RtrnSel. BackFunction 5CN3123123123CN3TB1PSC-5RACard KeyNo Voltage "a" ContactWhen the card key is inserted (i.e.someone is in the room), then thecontact turns ON.Indoor UnitWiredControllerOKInput/Output:01-03Input 1 00 CN3 1-2Input 2 00 CN3 2-3Output1 00 CN7 1-2Output2 00 CN7 1-3Output3 00 CN8 1-2Item Setting ConnectorAdj. Entr RtrnSel. Back