York P*XU/G9D-UP Installation Instruction

Contents

035-17480-000 Rev. A (800)6 Unitary Products GroupALL DIMENSIONS ARE IN INCHES, AND ARE APPROXIMATE.FIGURE 1 : Dimensions - Upflow Models (P*XU/G9D-UH)TABLE 1: RATINGS & PHYSICAL / ELECTRICAL DATA - UPFLOW MODELSMODELS P*XU/G9D—UPAFUE*LOW FIRETEMP RISE°FHIGH FIRETEMP RISE° FMAX .OUTLETAIR TEMP.° FBLOWERTOTALUNITAMPSMAX OVER -CURRENTPROTECT†MIN WIRESIZE( AWG) @75 FT.ONE WAY†INPUTMBHH /LOUTPUTMBH H /L NOM . CFM HP BLOWERAMPS SIZE60/39 55/36 1200 94.0 25 - 55 35 - 65 175 1/2 7.0 11 12.0 20 1480/52 74/48 1200 93.5 20 - 50 35 - 65 165 1/2 7.0 11 12.0 20 1480/52 76/48 1600 93.5 20 - 50 30 - 60 160 3/4 11.5 11 12.0 20 14100/65 93/60 1400 93.5 25 - 55 45 - 75 175 1/2 10.7 10 12.0 20 14100/65 94/60 2000 94.0 20 - 50 30 - 60 160 1 12.2 11 14.0 20 12120/78 112/72 2000 94.0 20 - 50 45 - 75 175 1 12.2 11 14.0 20 12*. AFUE numbers are determined in accordance with DOE test procedures†. Wire size and overcurrent protection must comply with the National Electrical Code (NFPA-70-latest edition).• For altitudes above 2,000 ft., reduce capacity 4% for each 1,000 ft. above sea level. Refer to Form 650.78-N1.1V.• Wire size based on copper conductors, 60°C, 3% voltage drop.• Continuous return air temperature must not be below 55°F.Models P*XU &G9D—UP A B C D E60 / 55 / 1200 / “B” 17-1/2 16-1/4 13-1/8 2 280 / 75 / 1200 / “B” 17-1/2 16-1/4 13-1/8 2 280 / 75 / 1600 / “C” 21 19-3/4 16-5/8 2 2100 / 95 / 1400 / “C” 21 19-3/4 16-5/8 2 2100 / 95 /2000 / “C” 21 19-3/4 16-5/8 2 2120 / 112 / 2000 / “D” 24-1/2 23-1/4 20-1/8 3 2 (3) **. Vent pipe must be increased to 3” on this unit.TOPIMAGEVentConnectionE(ventsize)BFRONTIntakeConnectionD20BOTTOMIMAGE(FRONT)23C3/4"FLANGEA28-1/2(WITHK.O.REMOVED)20Gas Pipe Entry1 1/4 x 2 1/2(All gas pipe connectionsare 1/2" NPT)B2-3/46-1/8AFront9 -7/86 -7/828 -1/2Optional Side ReturnCut-Out (Either Side)Condensate Drain7/8 JunctionBox HoleLeft Side6 3/81 1/4T-StatWiring7/8" K.G.Right Side622-3/43/41-3/48-7/814 -1/23-1/81-3/44-1/84520-5/83/4