York SCOH070K Technical Information

Also see for SCOH-070K: Installation instructions

York SCOH070K Technical Information Manual pdf 43 page image

43Fig.1Fig.2 Fig.3��Vertical air discharge conversion kit for:SCOH/SCOC-150 a 300KThis Kit allows converting the standard horizontal air dis-charge, in outdoor units SCOH/SCOC, version "V", to avertical discharge. The conversion process is as follows:1.- Remove and discard the upper panel ref. 1 and the gridref. 2 (fig. 1).2.- Remove the fan, standard motor assembly on support "A"(fig. 2).3.- Change the motor to the proportioned and mounted sup-port "B", making sure the pulleys are aligned (the centreof the tensor will be at about 20 mm. from the face of thefan) (fig. 3).4.- Fasten the fan to the wings "C" and supports "D" of theupper panel ref. 3, before or after mounting same on themachine, with the new self-drilling screws included in theKit (fig. 3).5.- Install the upper panel ref. 3 and the plenum cover ref. 4(fig. 4).6.- If the unit is to work without ducts, the protection gridsincluded in the kit should be mounted on the fan intakes(self-threading screws are supplied for mounting).General dimensions mm