Z Microsystems ZX3 User Manual
                      | |
Contents
| 
13Doc# 27-0044UM R ev B I ssued 7/13/2012OPERATIONSThis section will provide information and assistance with the following topics:• Powering up the ZX3 Station• ZX3 Status Information & Indicators• Inserting & Removing Tranzpak2 Storage Modules4.0 OPERATIONS4.1 POwERING ON ThE ZX3 STATIONThe ZX3 features status lights to effectively monitor the activities of the product:Power On LED1. Amber = 5V standby available, system isin standby (meaning OFF) mode.2. Green = system is ON.3. OFF = system is not connected to an ACpower sourcePower SwitchOT (Over Temp) LED1. OFF = system temperature is normal2. Red = system temperature is reachingcritical condition. User intervention isneeded.LAN LED 1 and 21. Blinking green = LAN port is connected andfunctioning normally2. OFF = LAN port is not connected and/ordisabledHD LEDs1. OFF = No hard drive activity or no harddrive connected2. Blinking amber = Indicates har d driveactivityHEATER LED1. RESERVED – Only in use for systemswith optional heaterFan LED – (LED with “Fan” text and fan symbol)1. Green = system fans are running normally2. Amber = one or more system fans is malfunctioning3. RED = all system fans are malfunctioning or system fans are not installed4.2 ZX3 STATUS INFORMATION & INdICATORS1. To power up the ZX3, press and hold(about 1 second) the Power Supply Switchat the center right side of the unit.2. T he display may possibly indicateitems that require attention. If such is thecase, please refer to the “Troubleshooting”in the Appendix. |
Related manuals for Z Microsystems ZX3
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine