ZENEC ZE-MC294 User Manual

Also see for ZE-MC294: Software update Update instructions Wiring instruction

Contents

ZENEC ZE-MC294 User Manual Manual pdf 16 page image

16USB/SD CARD OPERATIONUSING SD-CARD1. Open the cover flap, insert an SD-Cardinto the corresponding slot. The unit thenswitches to card mode, and automaticallystarts to play back the files found on thecard.2. To remove the card, you should fi rstselect another source, in order to avoiddamaging the card, press the cardslightly, and remove the card after it haspopped out, then dose the cap.3. Select a different source before youremove the inserted USB/SD datacarriers, to avoid damaging it's filesystem.USING USB DEVICE1. Open the cover flap, insert a USB deviceinto the USB connector.After connecting a USB device, the unitwill read and play the files automatically.2. To remove the USB device, youshould first select another source (saferemoval). USB/SD-CARD NOTES:USB functions and features concerning MP3music play.1. Supported file systems FAT12, FAT16,FAT32.2. Up to 200 directories and 500 files canbe displayed and played back from theUSB-data carrier.3. Descriptors of files, directories and titlesshouldn't exceed 32 characters/bytes,cause only the fi rst 32 chars will bedisplayed.4. ID tag version 2.0 is supported. However,the length of title, artist and albumdescriptor is limited to 32 chars/bytes.5. The device supports USB 1.1 and USB2.0 standards at the speed of USB 1.1. PLEASE NOTE:■ Due to varying specifi cations of commer-cially available USB-data carriers itcannot be guaranteed, that each andevery USB-stick will be supported.