ZIEHL-ABEGG PMIcontrol Basic-M Series Operating Instructions Manual

ZIEHL-ABEGG PMIcontrol Basic-M Series Operating Instructions Manual Manual pdf 18 page image

4.4.2 Procedure FSDM12/17:See the following drawing order 1. - 5.1. Apply PU sealant “Bond + Seal” to the whole flange face of the motor terminal box (any uneven-ness such as residue adhesive must be removed first to ensure that the adapter plate lies flat).2. Fasten the adapter plate with the screws of the terminal box (2.5 Nm / 22.1 Lb In).1 Holes for fastening adapter plate to flange of terminal box with the screws provided2 Studs for fastening motor connection adapter with 2 x serrated locking nuts M43 Studs for fastening holder of the two PE clamps with 2 x serrated locking nuts M44 Studs for fastening cover terminal compartment with 4 x serrated locking nuts M45 Insert nuts for fastening frequency inverter with 4 x countersunk screws M5 x 203. Fasten the motor connection adapter and make the electrical connection.– A: Fasten the motor connection adapter with 2 x M4 serrated locking nuts (2.5 Nm / 22.1 Lb In)– B: Fasten the holder and the two PE clamps with 2 x M4 serrated locking nuts and connect theprotective earth (2.5 Nm / 22.1 Lb In)– C: Connect the “TB” or “TP” thermal protectors. Cut off any ring cable lugs in advance (requiredstripping length 8 mm)– D: Connect motor winding (2 Nm / 17.7 Lb In)Attention!Circuit type (Y or D) and settings of the frequency inverter must be compatible.4. Fit the cover of the terminal compartment with four M4 serrated locking nuts (2.5 Nm / 22.1 Lb In).5. Fasten the frequency inverter with 4 countersunk screws M5 x 20 (TORX T20) (2.5 Nm /22.1 Lb In).Operating Instructions PMIcontrol Basic-M – model series FSDM5...46 MountingL-BAL-E300-GB 1905 Index 001 Part.-No.18/48