ZIEHL-ABEGG PMIcontrol Basic-M Series Operating Instructions Manual

ZIEHL-ABEGG PMIcontrol Basic-M Series Operating Instructions Manual Manual pdf 28 page image

Connection data terminals relaysFSDM5/7.5/8.5 FSDM12/17/25/32/39/46Stripping length 10 mm 5...6 mmMin. conductor cross-section solid 0.2 mm2 0.08 mm2Max. conductor cross-section solid 2.5 mm2 2.5 mm2Min. conductor cross-section flexible 0.2 mm2 0.08 mm2Max. conductor cross-section flexible 2.5 mm2 2.5 mm2Min. conductor cross-section flexible with wireend ferrule0.2 mm2 0.25 mm2Max. conductor cross-section flexible with wireend ferrule2.5 mm2 1.5 mm2Min. conductor cross-section flexible with wireend ferrule and collar0.2mm2 0.25 mm2Max. conductor cross-section flexible with wireend ferrule and collar2.5 mm2 1.5 mm2Min. conductor cross-section AWG AWG 26 AWG 28Max. conductor cross-section AWG AWG 12 AWG 12Connection data terminals controlFSDM5/7.5/8.5 FSDM12/17/25/32/39/46Stripping length 9 mm 8 mmMin. conductor cross-section solid 0.14 mm2 0.2 mm2Max. conductor cross-section solid 1.5 mm2 1.5 mm2Min. conductor cross-section flexible 0.2 mm2 0.2 mm2Max. conductor cross-section flexible 1.5 mm2 1.5 mm2Min. conductor cross-section flexible with wireend ferrule0.25 mm2 0.25 mm2Max. conductor cross-section flexible with wireend ferrule1.5 mm2 1.5 mm2Min. conductor cross-section flexible with wireend ferrule and collar0.25mm2 0.25 mm2Max. conductor cross-section flexible with wireend ferrule and collar1 mm2 0.75 mm2Min. conductor cross-section AWG AWG 26 AWG 24Max. conductor cross-section AWG AWG 16 AWG 165.3 EMC-compatible installation5.3.1 Control cablesPay attention to sufficient distance from powerlines and motor wires to prevent interferences. Thecontrol cable may not be longer than 30 m. Screened control cables must be used when the cablelength is longer than 20 m. When using a shielded cable connect the shielding to one side only, i.e.only to the control unit with the protective ground (keep cable short and with as little inductance aspossible!).5.3.2 Harmonics current for devices ≤ 16 AAccording to EN 61000-3-2 these devices are to be classified as “professional” devices.Connection to a low voltage supply (public networks) is allowed insofar as this has been clarified withthe respective energy supply company responsible.Operating Instructions PMIcontrol Basic-M – model series FSDM5...46 Electrical installationL-BAL-E300-GB 1905 Index 001 Part.-No.28/48