ZKTeco F18 User Manual

Also see for F18: Installation guide Quick start guide Installation guide User manual Quick start guide

Contents

Error! Use the Home tab to apply 标题 1 to the text that you want to appearhere.- 41 -menu.2.4.5 Access Control ParametersSet device control locks and related device parameters.Lock driver time length: Device control electronic lock is in enablingtime. （effective value 1～10 seconds)Door sensor delay: After the door is open, delay the time to check doorsensor. If door sensor state is different from the normal state of doorsensor mode, alarm will be given off. This time is called door sensordelay. （effective value: 1～99 seconds)Door sensor mode: It includes NONE, NC and NO. NONE means thereis no door sensor. NO means the door is open normally. NC means thedoor is closed normally.Door sensor alarm: When abnormal door sensor state is detected, alarmwill be given off after some time. This time is door sensor alarm.（effective value: 1～99 seconds)Alarm count: When the failed press times reach the set times, alarmsignal will come out.（effective value 1～9 times)NC time zone: Set time zone for access control NC. Nobody can unlockduring this time zone.NO time zone: Set time zone for access control NO. The lock is alwaysin enabling state during this time zone.Whether holiday is effective: Define time zone for NO or NC. Whetherthe time zone set in time zone is effective. Notice: 1) when time zone is set for NO or NC, please set doorsensor mode as “None”, or alarm signal may come out duringtime zone of NO or NC.