ZKTeco F18 User Manual
Also see for F18: Installation guideQuick start guideInstallation guideUser manualQuick start guide
                                                                                                | |
Contents
|
Error! Use the Home tab to apply 标题 1 to the text that you want to appearhere.- 43 -1:1 Trig: if select “Yes”, when user use 1:1 match mode, alarm signalwill come out. Or there is no alarm signal.1: N Trig: if select “Yes”, when user use 1: N match mode, alarm signalwill come out. Or there is no alarm signal.Pwd Trig: If select “Yes”, when user use password verification mode,alarm signal will come out. Or there is no alarm signal.Alarm delay: After duress alarm gets started, the alarm signal is notoutput directly. But it can be defined. After some time, alarm signal willbe generated automatically.（0-255 seconds) 。Operation:：Press Menu -> User Management -> Access Setting -> Duress alarmparameters (as shown below).Press ▲/▼to move cursor to the item to be set. If it is the input box,press numeric keys on small keyboard to input the value. If it is the rollbox, press / to switch the values. After setting, press Menu directlyto return to the last interface. Press “ESC” to cancel setting and return tothe last interface. |
Related manuals for ZKTeco F18
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine