Zanussi 5200 B Instructions For Use And Care Manual

Contents

17Fig. 12Fig. 11Fig. 13Removal/replacement of the oven lamp (Fig. 13)ImportantRemember to disconnect the electricity supply beforeundertaking maintenance of any kind.Push in and unscrew the glass cap anticlockwise.Remove the faulty bulb and replace with one thatresists heat to high temperatures (300°C). Electricbulb 15W - 240V (50Hz), 300°C, E14.These are available from your local Service Centre.Removing the oven door (Fig. 11 & 12)Warning:It is important that the retaining discs are fully turnedand located as the hinges are under high sprungtension.1. Open the door completely so that it is in thehorizontal position.2. Raise the two bars.3. Raise the door halfway.4. At this stage, clasp the two hinges on either side ofthe door together simultaneously. The door canthen be removed by pulling on and downwards.,maintaining the angle.Replacing the oven door1. Clasp the two hinges on either side of the doorsimultaneously.2. Hook the top hinge into the top slot, so that thehook is engages with the roller.3. Drop the lower hinge into the lower slot, so that thenotch is engaged. Drop the door down so it is inthe horizontal position.NoteIs it important when carrying out this operation, thatboth hinges be located simultaneously.4. Turn the bars.The door can then be closed.FO 0417FO 0967FO 0287

/ 18

Related manuals for Zanussi 5200 B