9Electronic minute minder1 = ( - ) Decrease control andminute minder setting button2 = ( + ) Increase control( ) Bell SymbolThe electronic minute minder can also beused to show the time of day.Please note that this is a 24 hour clock, forexample 2.00pm is shown as 1400.In the following pages we explain how to setthe controls. Read through them until youare familiar with the procedure.If the appliance is switched off on the wall, orthere is a loss of power, the clock will stopand you will not be able to use the mainoven.Set the time of dayWhen the electricity supply is first switchedON, the display will flash 0.00. See Fig.1.Press buttons (1) and (2) together. Releasebuttons, 0.00 will appear in the display asFig. 2. Within 5 seconds press button (2),12.00 will show in the display as Fig. 3.Within 5 seconds press and hold eitherbutton (1) to decrease or button (2) toincrease the time until the correct time of dayon the 24 hour clock is reached, e.g. 14.30.See Fig. 4.Note: The increase and decrease controlbuttons operate slowly at first and thenmore rapidly. They should be pressedseparately.AlarmStopSET TIMEPushBothButton 2Button 1Bell SymbolAlarmStopSET TIMEPushBothFig.1AlarmStopSET TIMEPushBothFig.2AlarmStopSET TIMEPushBothFig.3Fig. 1.Fig. 2.Fig. 3.AlarmStopSET TIMEPushBothFig.4Fig. 4.