Zanussi ZCM 64 Operating Instructions Manual

Contents

Zanussi ZCM 64 Operating Instructions Manual Manual pdf 12 page image

12Oven lamp replacementDisconnect the appliance.Unscrew the lamp and substitute it with another suitablefor higher temperature (300°C) having the followingcharacteristics:Tension: 230-240 (50Hz); Power:15W; Connection:E14Shelves and shelf supportsTo clean the chrome parts of the oven, soak in warmdetergent water and remove stubborn marks with a wellwetted soap impregnated pad. Rinse well and dry witha soft cloth. Do not use abrasive scourers or steel wool.Removing the oven shelfsupportsUnscrew the ring nuts securing the shelf supports (seediagram) and remove the supports after sliding themout of their retaining pins.WarningAlways unplug the appliance before removing the backpanel.To remove the back panel use a screwdriver. This is agood opportunity to clean the back of the rear panel.Wash the panels with very hot water and a detergentusing a soft cloth.If the shelf supports or the panels become very soiled,use a standard caustic product specially made forcleaning ovens.The Oven DoorBefore cleaning the oven door, we recommendyou to remove it from the oven.Proceed as follows:a) open the oven door completely;b) find the hinges linking the door to the oven;c) unlock and turn the small levers located on thetwo hinges;d) handle the door by its left- and right-hand sides,then slowly turn it towards the oven until it is half-closed;e) gently pull the oven door off its site;f) place it on a steady plan.Clean the oven door glass with warm water and a softcloth only.Once the cleaning is carried out, refit the oven door,following the procedure in reverse.FO 0145)Fig. 10Fig. 11Fig. 12