Zanussi ZDF2030 User Manual

• The end indicator light comes on.For better drying results, keep the door ajar for some mi-nutes before you remove the dishes.Let the dishes cool down before you remove them fromthe appliance. Hot dishes are easily damaged.Removing the load• First remove items from the lower basket, then fromthe upper basket.• There can be water on the sides and door of the appli-ance. Stainless steel becomes cool more quickly thanthe dishes.Care and cleaningWarning! Switch the appliance off before you cleanthe filters.Cleaning the filtersImportant! Do not use the appliance without the filters.Make sure that the installation of the filters is correct.Incorrect installation will cause unsatisfactory washingresults and damage to the appliance.1 2Fully clean the filters A, Band C below running wa-ter.3To remove filters B and C,turn the handle approxi-mately 1/4 anticlockwise.4Remove the flat filter Afrom the bottom of the ap-pliance.5Put the flat filter A in thebottom of the appliance.Install the flat filter cor-rectly under the twoguides D.6Put the filter system in po-sition. To lock the filtersystem, turn the handleclockwise until it locks inposition.Important! Do not remove the spray arms.If the holes in the spray arms become clogged, removeremaining parts of soil with a cocktail stick.External cleaningClean the external surfaces of the appliance and controlpanel with a damp soft cloth. Only use neutral detergents.Do not use abrasive products, scouring pads or solvents(acetone, trichloroethylene etc...).Frost precautionsCaution! Do not install the appliance where thetemperature is below 0 °C. The manufacturer is notresponsible for damage because of frost.If not possible, empty the appliance and close the door.Disconnect the water inlet hose and remove water fromthe water inlet hose.56