1 23Fill the salt container with1 litre of water (only thefirst operation).45 6It is normal that water overflows from the salt con-tainer when you fill it with salt.Make sure that there is no grain of salt outer of thesalt compartment. Salt which stays on the tank fora while drills the tank. It is recommended to start a wash-ing programme immediately after you fill the salt con-tainer. This prevents of corrosion because of spilled salt.When you set electronically the water softener to level 1,the salt indicator light does not stay on.Use of rinse aidCaution! Only use branded rinse aid fordishwashers.Do these steps to fill the rinse aid dispenser:1 23 47