Zanussi ZDT11001 User Manual

Also see for ZDT11001: User manual Operating instructions

Zanussi ZDT11001 User Manual Manual pdf 18 page image

Water hardness Water softeneradjustmentGermandegrees(°dH)Frenchdegrees(°fH)mmol/l ClarkedegreesManual Electronic11 - 14 19 - 25 1.9 - 2.5 13 - 17 1 34 - 10 7 - 18 0.7 - 1.8 5 - 12 1 2< 4 < 7 < 0.7 < 5 12) 12)1) Factory position.2) Do not use salt at this level.Manual adjustment1 2Turn the water hardnessdial to the position 1 or 2.EElectronic adjustment1. Press the on/off button to activate the appliance.2. Make sure that the appliance is in setting mode. Referto ‘SETTING AND STARTING A PROGRAMME’.3. Press and hold the programme button until the pro-gramme indicator (AA) flashes and the programme in-dicator (BB) comes on.4. Wait until the programme indicator (BB) goes off andthe end indicator starts to flash (the programme indi-cator (AA) continues to flash).5. Press the programme button.• The end indicator flashes intermittently. The num-ber of flashes shows the level of the water softener.Example: 5 flashes + pause + 5 flashes = level 5.6. To adjust the level of the water softener, press theprogramme button. Each time you press the pro-gramme button you go to the next level.7. Deactivate the appliance to confirm.Filling the salt containerCaution! Only use dishwasher salt. Other productscan cause damage to the appliance.Water and salt can come out from the salt container whenyou fill it. Risk of corrosion. To prevent it, after you fill thesalt container, start a programme.1 23Put 1 litre of water in thesalt container (only for thefirst time).4118