5 6FFilling the rinse aid dispenserCaution! Only use rinse aid for dishwashers. Otherproducts can cause damage to the appliance.The rinse aid, during the last rinsing phase, helps todry the dishes without streaks and stains.1 2maxMAX1234+3 4maxMAX1234+AFill the rinse aid dispenserwhen the lens (AA) is clear.MAX1234+To adjust the releasedquantity of rinse aid, turnthe selector between posi-tion 1 (lowest quantity)and position 4 (highestquantity).DDaily use1. Open the water tap.2. Press the on/off button to activate the appliance.Make sure that the appliance is in setting mode. Referto ’SETTING AND STARTING A PROGRAMME’.• If the salt indicator is on, fill the salt container.3. Make sure that there is rinse aid in the rinse aid dis-penser.4. Load the baskets.5. Add the detergent.6. Set and start the correct programme for the type ofload and the degree of soil.Loading the basketsRefer to the supplied leaflet with examples of theload of the baskets.• Only use the appliance to wash items that are dish-washer-safe.• Do not put in the appliance items made of wood, horn,aluminium, pewter and copper.• Do not put in the appliance items that can absorb water(sponges, household cloths).• Remove remaining food from the items.• Make soft the remaining burned food on the items.• Put hollow items (cups, glasses and pans) with theopening down.• Make sure that cutlery and dishes do not bond togeth-er. Mix spoons with other cutlery.• Make sure that glasses do not touch other glasses.• Put small items in the cutlery basket.• Put light items in the upper basket. Make sure that theitems do not move.• Make sure that the spray arms can move freely beforeyou start a programme.19