Zanussi ZDT311 User Manual

Also see for ZDT311: User manual User manual

Zanussi ZDT311 User Manual Manual pdf 29 page image

1 2Fully clean the filters A, Band C below running wa-ter.3To remove filters B and C,turn the handle approxi-mately 1/4 anticlockwise.4Remove the flat filter Afrom the bottom of the ap-pliance.5Put the flat filter A in thebottom of the appliance.Install the flat filter cor-rectly under the twoguides D.6Put the filter system in po-sition. To lock the filtersystem, turn the handleclockwise until it locks inposition.Important! Do not remove the spray arms.If the holes in the spray arms become clogged, removeremaining parts of soil with a cocktail stick.External cleaningClean the external surfaces of the appliance and controlpanel with a damp soft cloth. Only use neutral detergents.Do not use abrasive products, scouring pads or solvents(acetone, trichloroethylene etc...).Frost precautionsCaution! Do not install the appliance where thetemperature is below 0 °C. The manufacturer is notresponsible for damage because of frost.If not possible, empty the appliance and close the door.Disconnect the water inlet hose and remove water fromthe water inlet hose.What to do if…The appliance does not start or stops during operation. If there is a fault, first try to find a solution to the problemyourself. If you cannot find a solution to the problemyourself, contact the Service Force Centre.29