Zanussi ZDTS102 User Manual

Contents

Zanussi ZDTS102 User Manual Manual pdf 12 page image

1 2Fully clean the filters A, Band C below running wa-ter.3To remove filters B andC, turn the handle ap-proximately 1/4 anti-clockwise.4Remove the flat filter Afrom the bottom of the ap-pliance.5Put the filter system inposition. To lock the filtersystem, turn the handleclockwise until it locks inposition.Important! Do not remove the spray arms.If the holes in the spray arms become clogged, removeremaining parts of soil with a cocktail stick.External cleaningClean the external surfaces of the appliance and con-trol panel with a damp soft cloth. Only use neutral de-tergents. Do not use abrasive products, scouring padsor solvents (acetone, trichloroethylene etc...).Frost precautionsCaution! Do not install the appliance where thetemperature is below 0 °C. The manufacturer isnot responsible for damage because of frost.If not possible, empty the appliance and close the door.Disconnect the water inlet hose and remove water fromthe water inlet hose.What to do if…The appliance does not start or stops during operation.If there is a fault, first try to find a solution to the problemyourself. If you cannot find a solution to the problemyourself, contact your dealer or the Service Force Cen-tre.12