Zanussi ZDTS102 User Manual

Contents

Zanussi ZDTS102 User Manual Manual pdf 4 page image

Programme selection/cancel buttonUse the programme selection/cancel button for theseoperations:• To set the washing programme. Refer to the chapter'Setting and starting a washing programme'.• To set the water softener. Refer to the chapter 'Set-ting the water softener'.• To deactivate/activate the audible signals. Refer tothe section 'Audible signals'.• To cancel a washing programme in progress. Referto the chapter 'Setting and starting a washing pro-gramme'.Setting modeThe appliance is in setting mode when all the pro-gramme indicator lights are off and the end indicatorlight flashes.The appliance must be in setting mode for these oper-ations:– To set a washing programme.– To set the water softener level.– To deactivate/activate the audible signals.If a programme indicator light is on, cancel the pro-gramme to go back to the setting mode. Refer to thechapter "Setting and starting a washing programme".Programme indicator lights A and BApart the selection of the corresponding washing pro-gramme; these lights have an auxiliary functions:• The adjustment of the water softener level.• Deactivation/activation of the audible signals.Audible signalsYou can hear an audible signal:• At the end of the washing programme.• When the appliance has a malfunction.The activation of the audible signals is set at the factory.Do these steps to deactivate the audible signals:1. Switch on the appliance.2. Make sure that the appliance is in setting mode.3. Press and hold the programme selection/cancelbutton until programme indicator light A flashesand programme indicator light B comes on.4. Press the programme selection/cancel buttonagain.– Programme indicator light A comes on.– Programme indicator light B starts to flash.5. Wait until programme indicator light A goes off.– Programme indicator light B continues to flash.– The end indicator light comes on.The audible signals are activated.6. Press the programme selection/cancel buttonagain.– The end indicator light goes off.The audible signals are deactivated.7. Switch off the appliance to save the operation.Do these steps to activate the audible signals:1. Do the above procedure until the end indicator lightcomes on.Washing programmesWashing programmesProgramme Degree ofsoilType ofload Programme descriptionHeavy soilCrockery,cutlery, potsand pansPrewashMain wash up to 70°C2 intermediate rinsesFinal rinseDrying4