ADDING MULTI-TABLETS212 0 3 0• Do not fill the salt container and the rinse aid dispenser.• Adjust the water softener to the lowest level.• Set the rinse aid dispenser to the lowest position.STARTING A PROGRAMME1. Keep the appliance door ajar.2. Press the on/off button to activate the appliance. Make sure that the appliance is in programmeselection mode.3. Press the programme button until the indicator of the programme you want to set comes on.4. Close the appliance door to start the programme.OPENING THE DOOR WHILE THE APPLIANCE OPERATESIf you open the door while a programme is running, the appliance stops. When you close the door, theappliance continues from the point of interruption.END OF THE PROGRAMME• Press the on/off button to deactivate the appliance.• Close the water tap.If you do not press the on/off button, after few minutes from the end of the programme all theindicators go off. This helps to decrease the energy consumption.10