Zanussi ZDV12002FA User Manual

Also see for ZDT 21001FA: Operating instructions

Contents

• Do not use abrasive products, abrasive cleaningpads or solvents.INTERNAL CLEANING• Carefully clean the appliance, including therubber gasket of the door, with a soft moistcloth.• If you regularly use short duration programmes,these can leave deposits of grease andlimescale inside the appliance. To prevent this,we recommend to run long durationprogrammes at least 2 times per month.TROUBLESHOOTINGIf the appliance does not start or it stops duringoperation, before you contact an AuthorisedService Centre, check if you can solve the problemby yourself with the help of the information in thetable.With some problems the end indicator flashesintermittently indicating a malfunction.Problem and alarm code Possible solutionYou cannot activate the appliance. • Make sure that the mains plug is connected to themains socket.• Make sure that there is no a damage fuse in the fusebox.The programme does not start. • Make sure that the appliance door is closed.• The appliance has started the procedure to re-charge the resin inside the water softener. The dura-tion of the procedure is approximately 5 minutes.The appliance does not fill with water.• The end indicator flashes 1 time inter-mittently.• Acoustic signal sounds 1 time intermit-tently.• Make sure that the water tap is open.• Make sure that the pressure of the water supply isnot too low. For this information, contact your localwater authority.• Make sure that the water tap is not clogged.• Make sure that the filter in the inlet hose is not clog-ged.• Make sure that the inlet hose has no kinks or bends.The appliance does not drain the water.• The end indicator flashes 2 times inter-mittently.• Acoustic signal sounds 2 times inter-mittently.• Make sure that the sink spigot is not clogged.• Make sure that the drain hose has no kinks orbends.The anti-flood device is on.• The end indicator flashes 3 times inter-mittently.• Acoustic signal sounds 3 times inter-mittently.• Close the water tap and contact an AuthorisedService Centre.Once you have checked the appliance, deactivateand activate the appliance. If the problem occursagain, contact an Authorised Service Centre.For alarm codes not described in the table, contactan Authorised Service Centre.13

/ 16

Related manuals for Zanussi ZDT 21001FA