Zanussi ZFC11400WA User Manual

OperationSwitching onCBA A) Temperature RegulatorB) Half Loaded positionC) Full Loaded position1. Insert the plug into the wall socket.2. Turn the Temperature Regulator to the FullLoaded position and let the appliance runfor 24 hours to allow the correcttemperature to be reached before placingfood inside.The pilot light will light up.3. Adjust the Temperature Regulatoraccording to the quantity of the storedfoods.Switching offTurn the Temperature regulator to the OFFposition.Temperature regulationThe temperature within the appliance iscontrolled by the Temperature Regulatorsituated on the control panel.To operate the appliance, proceed as follows:• to obtain the minimum coldness, turn theTemperature Regulator toward lowersettings.• to obtain the maximum coldness. turn theTemperature Regulator toward highersettings.In case of freezing less foodvolumes, the Half Loaded setting isthe most suitable. In case of freezingmuch food volumes, the Full Loadedsetting is the most suitable.Before first useWARNING!Refer to Safety chapters.Cleaning the interiorBefore using the appliance for the first time, theinterior and all internal accessories should bewashed with lukewarm water and some neutralsoap to remove the typical smell of a brand-newproduct, then dried thoroughly.CAUTION!Do not use detergents or abrasivepowders, as these will damage thefinish.Daily useWARNING!Refer to Safety chapters.1 Refer to "Technical data"www.zanussi.com 5