Zanussi ZFC31401WA User Manual

Also see for ZFC31401WA: User manual User manual

Contents

Problem Possible cause SolutionThere is no voltage in the mainssocket (try to connect another ap-pliance into it).Call an electrician.Customer ServiceIf your appliance is still not working properly af-ter making the above checks, contact the near-est service centre.To obtain fast service, it is essential that whenyou apply for it you specify the model and serialnumber of your appliance which can be foundeither on the guarantee certificate or on the rat-ing plate located on the external right side of theappliance.Replacing the lamp1. Disconnect the mains plug from the mainssocket.2. Replace the lamp with one of the samepower and specifically designed for house-hold appliances. (the maximum power isshown on the lamp cover)3. Connect the mains plug to the mains sock-et.4. Open the lid. Make sure that the lampcomes on.InstallationPositioningWarning! If you are discarding an oldappliance that has a lock or catch on thelid, you must ensure that it is made unusable toprevent young children being trapped inside.Important! The appliance shall have the plugaccessible after installation.This appliance can be installed in a dry, wellventilated indoor (garage or cellar), but for opti-mum performance install this appliance at a lo-cation where the ambient temperature corre-sponds to the climate class indicated on the rat-ing plate of the appliance:ClimateclassAmbient temperatureSN +10°C to + 32°CN +16°C to + 32°CST +16°C to + 38°CT +16°C to + 43°CElectrical connectionBefore plugging in, ensure that the voltage andfrequency shown on the rating plate correspondto your domestic power supply.The appliance must be earthed. The power sup-ply cable plug is provided with a contact for thispurpose. If the domestic power supply socket isnot earthed, connect the appliance to a sepa-rate earth in compliance with current regula-tions, consulting a qualified electrician.19www.zanussi.comwww.preciz.hu