Zanussi ZFC31401WA User Manual

Also see for ZFC31401WA: User manual User manual

Contents

Problem Possible cause SolutionThe appliance is noisy. The appliance is not supportedproperly.Check if the appliance standsstable.Audible or visual alarm is on. The cabinet has been recentlyswitched on or the temperaturein the appliance is too high.Refer to "High TemperatureAlarm" and if the problem still oc-curs contact the nearest Author-ized Service Centre.Power indicator light is flashing. An error has occurred in measur-ing the temperature or the appli-ance is not working properly.Contact the nearest AuthorizedService Centre.The lid doesn't close completely. Food packages are blocking thelid.Arrange the packages in the rightway, see the sticker in the appli-ance.There is excessive frost. Eliminate excess frost.The lid is difficult to open. The lid gaskets are dirty or sticky. Clean the lid gaskets.The valve is blocked. Check the valve.The lamp does not work. The lamp is defective. Refer to "Replacing the lamp".The compressor operates contin-ually.Temperature is set incorrectly. Refer to "Operation" chapter.Large quantities of food to befrozen were put in at the sametime.Wait some hours and then checkthe temperature again.The room temperature is toohigh.Refer to climate class chart onthe rating plate.Food placed in the appliancewas too warm.Allow food to cool to room tem-perature before storing.The lid is not closed properly. Check if the lid closes well andthe gaskets are undamaged andclean.There is too much frost and ice. The lid is not closed correctly orthe gasket is deformed/dirty.Refer to "Closing the door".The water drainage plug is notcorrectly positioned.Position the water drainage plugin the correct way.Temperature is set incorrectly. Refer to "Operation" chapter.The temperature in the applianceis too low/too high.The temperature regulator is notset correctly.Set a higher/lower temperature.The door is not closed correctly. Refer to "Closing the door".www.zanussi.com 21