Zanussi ZFC639WAP User Manual

Also see for ZFC639WAP: User manual

Problem Possible cause SolutionThere is no voltage in the mains socket(try to connect another appliance intoit).Call an electrician.Customer ServiceIf your appliance is still not working properly after makingthe above checks, contact the nearest service centre.To obtain fast service, it is essential that when you applyfor it you specify the model and serial number of yourappliance which can be found either on the guaranteecertificate or on the rating plate located on the externalright side of the appliance.Replacing the lamp1.Disconnect the mains plug from the mains socket.2. Replace the lamp with one of the same power (themaximum power is shown on the lamp cover).3. Connect the mains plug to the mains socket.4. Open the lid. Make sure that the lamp comes on.Technical dataVolume (gross) Litre 378 Height mm 868 Rising Time hours 29Volume (net) Litre 368 Width mm 1600 Energy Consumption kWh/24h 0,792Rated Power Watt 140 Depth mm 665 Freezing Capacity kg/24h 29Voltage Volts 230 Weight Kg 69 Climatic Class SN/N/STFurther technical information are situated in the rating plate on the external right side of the appliance.InstallationPositioningWarning! If you are discarding an old appliance thathas a lock or catch on the lid, you must ensure thatit is made unusable to prevent young children beingtrapped inside.Important! The appliance shall have the plug accessibleafter installation.This appliance can be installed in a garage or cellar, butfor optimum performance install this appliance at a loca-tion where the ambient temperature corresponds to theclimate class indicated on the rating plate of the appliance:18