Zanussi ZFU 23 SF Instruction Booklet

Contents

Zanussi ZFU 23 SF Instruction Booklet Manual pdf 9 page image

INSTALLATIONLocationThe appliance should be installed well away fromsources of heat such as radiators, boilers, directsunlight etc.For safety reasons, minimum ventilation must be asshown in Fig.Appliance positioned under overhanging kitchen wallunits (see Fig. A).Appliance positioned without overhanging kitchenwall units (see Fig. B).Attention: keep ventilation openings clear ofobstruction.Two adjustable feet at the cabinet base allowaccurate levelling of the appliance. Electrical connectionBefore plugging in, ensure that the voltage andfrequency shown on the serial number platecorrespond to your domestic power supply. Voltagecan vary by ±6% of the rated voltage.For operation with different voltages, a suitably sizedauto-transformer must be used.The appliance must be earthed.The power supply cable plug is provided with acontact for this purpose.If the domestic power supply socket is not earthed,connect the appliance to a separate earth incompliance with current regulations, consulting aspecialist technician.The Manufacturer declines all responsibility ifthe above safety precautions are not observed.This appliance complies with the followingE.E.C. Directives:- 87/308 EEC of 2/6/87 relative to radio interferencesuppression.- 73/23 EEC of 19.2.73 (Low Voltage Directive) andsubsequent modifications;- 89/336 EEC of 3.5.89 (ElectromagneticCompatibility Directive) and subsequentmodifications.Rear spacersIn the bag with the documentation, there are twospacers which must be fitted in the two topcorners.Slacken the screws and insert the spacer under thescrew head, then re-tighten the screws.ATTENTION!It must be possible to disconnect the appliance fromthe mains power supply; the plug must therefore beeasily accessible after installation.18

/ 11

Related manuals for Zanussi ZFU 23 SF