Zanussi ZGF 983 ITX Instruction Booklet

Contents

RQFITTING THE LIDWe recommend the lid hinge block are fittedbefore installing the hob into the worktop.To install the lid onto the hob, proceed as follows:a. Remove the right and left hand grid blocks fitted to theback of the hob, by unscrewing the relevant screws(Fig. 10)b. Fit the lid hinge blocks onto the hob, using the originalscrews, ensuring that the relevant shims are fittedbetween the hinge blocks and the hob (Fig. 10);c. Fit the left hand lid hinge (marked S) into the hinge block(Fig.11);d. Carry out the same operation with the right hand lidhinge (marked D).ADJUSTING THE LID BALANCETo adjust the lid balance, turn clockwise or anti-clockwisethe central screw of the right- and left-hand hinges (Fig.12).7. Building InThese hobs can be inserted in a built-in kitchen unitwhose depth is between 550 and 600 mm. The hobsdimensions are shown in Fig. 9.A = Auxiliary burner SR = Semirapid burnerR = Rapid Burner UR = Triple Crown BurnerFig. 9Fig. 10Fig. 11 Fig. 12py2PHQT py2PHQU510860ASRURSRRpy2PHQS510860ASRURSRRZGF 983 ITX ZGF 983 ITXC