Zanussi ZL 65 Instruction Book

Contents

Installation195 Fit the (A) screws in the desired set of holesfor 85, 88 or 90 cm worktop height ( SEE ILLU -STRATION A).6 Lift the cooker back into the upright positionand connect it to the electrical supply. Push thecooker into place and adjust its level (see below)before fitting the safety equipment.Levelling the cookerThe cooker must be level, for example to ensure that oilin frying pans is of even depth. To check whether thecooker is level, use a spirit level on the hob surround(but not on the hotplates themselves). Check the levelfirst front to back and then side to side.If necessary, you can lower (-6 mm) or raise (+12mm) the wheels and feet, working from the front of thecooker. Use a Phillips screwdriver to adjust the rearwheels, and adjustable pliers for the front feet. Oncethe cooker is properly level, you need to lock these feetwith the nut. Turn it anticlockwise using the spannersupplied.Electrical connectionRepairs and work on the cooker must be carriedout by a QUALIFIED ELECTRICIAN. Work performedby unqualified persons can damage the cooker,and may also lead to personal injury and/ordamage to property.The connection options for the cooker are shown onthe plate on the rear of the cooker. Wattage and voltageis stated on the rating plate (see the right-hand side ofthe cooker).12