12Fig. 8Fig. 9Fig. 7Replacing the Oven LightIf the oven bulb needs replacing, it must comply with thefollowing specifications:- Power: 15 W,- Voltage: 230 V (50 Hz),- Temperature Rating of 300 °C,- Thread type: E14.These bulbs are available from your local Service ForceCentre.To replace the faulty bulb (Fig. 7):1. Ensure the oven is disconnected from the electricalsupply.2. Turn the glass cover anticlockwise.3. Remove the faulty bulb and replace with the new one.4. Refit the glass cover.5. Reconnect to the electrical supply.The Hinged GrillSome models are fitted with a hinged grill element, toenable you to clean the roof of the oven easily.Before proceeding ensure the oven is cooland is isolated from the electricity supply.● Undo the screws which hold the grill in place (seeFig. 8). When doing this operation for the first time,we recommend using a screwdriver.● Then gently pull the grill downward to allow access tothe oven roof.● Clean the oven roof with a suitable cleaner and wipedry before replacing the hinged grill element.● Gently push up the grill element into place and firmlyscrew into place the holding nuts.Ensure the grill holding nuts are firmly in placeto avoid the grill falling down when in use.Grease FilterWhen cooking meat, the grease filter must be fitted overthe oven fan by clipping it over the vents in the backpanel. This will prevent a built-up of fat on the fan impellor.Do not use abrasive materials to clean the seal. Thegrease filter is dishwasher proof.When cooking is completed and the oven has cooleddown, remove the filter by pushing the protruding tongueon the filter upward. (See Fig. 9) Wash the filter after useusing warm soapy water.Fit the grease filter only when roasting.