Zanussi ZRT 1646 Instruction Book

Contents

12Ventilation RequirementsThe appliance must have adequate ventilation toensure correct operation.Diagram shows the ventilation requirements wheninstalled:A* Under a worktop, or cupboard.* The clearance space of 10 cm above the appliancemay be reduced to 5 cm providing a clearancespace 2.5 cm is left on either side of the appliance.B When freestandingLevellingThe appliance must be level. Level the appliance byadjusting the two adjustable feet (1) at the front of theappliance.If required the washer (2) can be removed.21Door ReversalIf required the opening direction of the door can bechanged as follows:To reverse the bottom hinge assembly proceed asfollows:Disconnect the appliance from the electricitysupply.Tilt the appliance backwards, resting the top edgeof the appliance on a stool or something similar.Unscrew the adjustable feet situated on both sidesat the front (2 pieces). Remove the lower doorhinge plate by unscrewing the 3 retaining screws.Remove the hinge pin from the bottom of the door.Slot the hinge pin into the hole in the hinge plateand relocate the hinge assembly to the oppositelocation and refit using the retaining screws.Put the cabinet in the upright position.