Zanussi ZRT318W User Manual

Also see for ZRT318W: Instruction book

Contents

1. Fit the spacers intothe holes. Make surethat the arrow (A) ispositioned as shownin the picture.2. Turn counter-clock-wise the spacersthrough 45° until theylock into place.45˚ALevellingWhen placing the appli-ance ensure that it standslevel. This can be achievedby two adjustable feet atthe bottom in front.LocationThe appliance should be installed well away from sourcesof heat such as radiators, boilers, direct sunlight etc. En-sure that air can circulate freely around the back of thecabinet. To ensure best performance, if the appliance ispositioned below an overhanging wall unit, the minimumdistance between the top of the cabinet and the wall unitmust be at least 100 mm . Ideally, however, the applianceshould not be positioned below overhanging wall units.Accurate levelling is ensured by one or more adjustablefeet at the base of the cabinet.If the cabinet is placed in a corner and the side with thehinges facing the wall, the distance between the wall andthe cabinet must be at least 10 mm to allow the door toopen enough so that the shelves can be removed.Warning! It must bepossible to discon-nect the appliance from themains power supply; theplug must therefore be easi-ly accessible after installa-tion.min.100 mm15 mm15 mmDoor reversibilityImportant! To carry out the following operations, wesuggest that this be made with another person that willkeep a firm hold on the doors of the appliance during theoperations.To change the opening direction of the door, do thesesteps:20Downloaded from Fridge-Manual.com Manuals