Zanussi ZRT318W User Manual

Also see for ZRT318W: Instruction book

Contents

1. Remove the plug fromthe power socket.2. Open the door of thefreezer. Loosen the hinge.3. Remove the doors bypulling them slightly andremove the hinge.1234. On the opposite side, re-move the hole covers.5. Unscrew both adjustablefeet and the screws of thebottom door hinge. Re-move the bottom doorhinge and install it on theopposite side.6. Unscrew the bottom farside screw and install onthe opposite side.7. Unscrew the top doorholding pin.8. Screw the pin back on theother side.9. Fit the doors into the pinsand install the doors. Installthe hinge.32110. On the opposite site,install the hole covers pro-vided within the accessorybag.11. Tighten the hinge.Make sure that the doorsare aligned.12. Remove and install thehandle1)13. Reposition, level theappliance, wait for at leastfour hours and then con-nect it to the power socket.1) If foreseenDo a final check to make sure that:• All screws are tightened.• The door opens and closes correctly.If the ambient temperature is cold (i.e. in Winter), thegasket may not fit perfectly to the cabinet. In that case,wait for the natural fitting of the gasket.In case you do not want to carry out the above mentionedoperations, contact the nearest After Sales Service Force.The After Sales Service specialist will carry out the rever-sibility of the doors at your cost.21Downloaded from Fridge-Manual.com Manuals

/ 24

Related manuals for Zanussi ZRT318W