Zanussi ZSM 35 K Operating And Installation Manual

Contents

Zanussi ZSM 35 K Operating And Installation Manual Manual pdf 6 page image

7Electrical connectionWe strongly recommend that all operations for theinstallation of your oven be carried out byQUALIFIED PERSONNEL.The oven designed to be connected to 240V(50Hz) electricity supply.The oven has an easily accessible terminal blockwhich is marked as follows:Letter L - Live terminalLetter N - Neutral terminal- Earth terminalTHIS APPLIANCE MUST BEEARTHEDThe cable used to connect the oven to theelectrical supply should have the characteristicsindicated in the table.It is necessary that you install a double poleswitch between the appliance and theelectricitysupply (mains), with a minimum gap of 3 mmbetween the switch contacts and of a type suitablefor the required load in compliance with thecurrent rules.The switch must not break the yellow and greenearth cable at any point.ImportantAfter installation and connecting, the cable mustbe placed so that it cannot at any point reach atemperature of more than 50°C above the ambienttemperature.Before the appliance is connected, check that themain fuse and the domestic installation cansupport the load; and that the power supply isproperly earthed.The manufacturer disclaims any responsibilityshould these safety measures not be carried out.This appliance meets the requirements laid downin EEC Directive No. 89/336 relating to thesuppression of radio and TV interference.Models Rating Cable cross Fusesection mm 2 andType of the cable min.ZSA35 W 2840 W 2,5Ho5 RR-F 13 A