Zanussi ZVT 64 N User Information

14Installation Instructions1 Safety instructionsWarning! This must be read!The laws, ordinances, directives and standardsin force in the country of use are to be followed(safety regulations, proper recycling in accord-ance with the regulations, etc.)Installation may only be carried out by a quali-fied electrician.The minimum distances to other appliancesand units are to be observed.Anti-shock protection must be provided by theinstallation, for example drawers may only beinstalled with a protective floor directly under-neath the appliance.The cut surfaces of the worktop are to be pro-tected against moisture using a suitable seal-ant.The sealant seals the appliance to the work topwith no gap.Do not use silicon sealant between the appli-ance and the work top.Avoid installing the appliance next to doors andunder windows. Otherwise hot cookware maybe knocked off the rings when doors and win-dows are opened.z Risk of injury from electrical current.• The electrical mains terminal is live.• Make electrical mains terminal free of volt-age.• Follow connection schematic.• Observe electrical safety rules.• Ensure anti-shock protection by installingcorrectly.• The appliance must be connected to theelectrical supply by a qualified electrician.z Risk of injury from electrical current.• Loose and inappropriate plug and socketconnections can make the terminal overheat.• Have the clamping connections correctly in-stalled by a qualified electrician.• Use strain relief clamp on cable.• In the event of single-phase or two-phaseconnection, the appropriate mains cable oftype H05BB-F Tmax 90°C(or higher) or anequivalent type must be used.• If this appliance’s mains cable is damaged, itmust be replaced by a special cable (typeH05BB-F Tmax 90°C; or higher) or an equiv-alent type. The latter is available from theCustomer Care Department.A device must be provided in the electrical in-stallation which allows the appliance to be dis-connected from the mains at all poles with acontact opening width of at least 3 mm.Suitable isolation devices include line protect-ing cut-outs, fuses (screw type fuses are to beremoved from the holder), earth leakage tripsand contactors.