Zanussi zft11110wa User Manual

Also see for zft11110wa: User manual

Contents

Closing the door1. Clean the door gaskets.2. If necessary, adjust the door. Refer to "In-stallation".3. If necessary, replace the defective doorgaskets. Contact the Service Center.Technical dataDimensionHeight 850 mmWidth 595 mmDepth 635 mmRising Time 24 hVoltage 230 VFrequency 50 HzThe technical information are situated in the rat-ing plate on the internal left side of the appli-ance and in the energy label.InstallationCaution! Read the "Safety Information"carefully for your safety and correctoperation of the appliance before installing theappliance.PositioningThis appliance can be installed in a dry, wellventilated indoor (garage or cellar) also, but foroptimum performance install this appliance at alocation where the ambient temperature corre-sponds to the climate class indicated on therating plate of the appliance:ClimateclassAmbient temperatureSN +10°C to + 32°CN +16°C to + 32°CST +16°C to + 38°CT +16°C to + 43°CLevellingWhen placing the ap-pliance ensure that itstands level. This canbe achieved by twoadjustable feet at thebottom in front .LocationThe appliance should be installed well awayfrom sources of heat such as radiators, boilers,direct sunlight etc. Ensure that air can circulatefreely around the back of the cabinet. To ensurebest performance, if the appliance is positionedbelow an overhanging wall unit, the minimumdistance between the top of the cabinet andthe wall unit must be at least 100 mm . Ideally,however, the appliance should not be posi-tioned below overhanging wall units. Accuratelevelling is ensured by one or more adjustablefeet at the base of the cabinet.10 www.zanussi.com