23ActionThere are multiple choices for action taking which is optional for user to select all of them or part of them:Send Image、Send Notification、Activate Digital Output or Night Mode. Send Image: You may set up where the image sent to, options like event server and SD card. You mustconfigure it first, please refer to Event Server. Send Notification: Firstly got to HTTP server configure the HTTP server URL, port, User ID,Password, and Proxy server settings.Note: The setting of URL should be the same as CGI. Active Digital Output: Firstly configure the PTZ to set up the preset positions and tour you desired.You may select to return to the last position after the event being triggered. Night Mode: You may set up this action being activated continually while the event triggered orcontinually every period(by second) interval.Note : Only Motion Detection excludes Night ModeScheduleYou may set up the event schedule as “always” or scheduled by working day, weekend or night mode. You mustconfigure schedule before using it.Motion DetectionAdd the motion detection zone and name it, you can adjust the zone of detection with the mouse. There are 10for detection zone at maximum. The bar on the top of motion detection area is red when the alarm is triggered.Threshold: Set the threshold of the alarm in the motion detection zone. The higher threshold is, lesserdetections can be triggered.Sensitivity: Set the sensitivity for motion detection zone. The higher sensitivity is, the more sensitive it gets.Audio DetectionSelect “on” if you want to activate the audio detection. The bar on the top of motion detection area is red whenalarm is triggered.Threshold: Set alarm threshold for audio detection. The higher threshold is, the lesser detections can betriggered.Sensitivity: Set alarm sensitivity for audio detection. The higher sensitivity is, the more sensitive it gets.