Zavio F3210 User Manual
                             | |
25IP Address FilterOnce enabled it, the listed IP address are allowed or denied access to the product. Add the IP Address thatyou’d like to allow or deny and select allow or deny from the list and save it.HTTPSHTTPS is a URL scheme used to indicate a secure HTTP connection. It is syntactically identical to thehttp:// scheme normally used for accessing resources using HTTP. Using an https: //URL/ with a differentdefault TCP port (443) and an additional encryption / authentication layer between the HTTP and TCP.You can use the IP camera through HTTPS easily by using https:// instead of http://. Create & Install: Create a self-signed certificate for HTTPS to recognize. Installed Certificate: Display or remove the properties of the installed certificate. HTTPS Connection Policy: Set HTTPS connection policy for different level of users. To use the HTTPS encryption, please set up “Create self-signed certificate” for the first time youuse the HTTPS function, and then set up the connection policy for different users.Note: When enable HTTPS with RTSP on mode, the IP Camera only protect the setting such as usernameand password and do not protect video and audio. When enable HTTPS with RTSP off mode, the IP Camerawill protect all setting including video and audio.Network BasicPlease refer to p.10~14Network AdvancedRTSPGeneralRTP Port Range: The default value of port range is 5000 ~ 7999 and can be changed from 1124 to 65534.RTSP Port: The default value is 554. If the IP Cameras connected with router and installed outside are over2 sets and all of them need support RTSP, please fill the value in the blank space in the range from 1124 to65534. |
Related manuals for Zavio F 3000
manualsdatabase
Your AI-powered manual search engine