Zehnder Rittling ComfoAir 200 Installer Manual

Also see for ComfoAir 200: User manual User document User documentation Manual Instruction manual

Zehnder Rittling ComfoAir 200 Installer Manual Manual pdf 14 page image

EN - 10Menu optionsP8 Setting the RF input and analogueinputs (0-10V)P9 Reading statuses (from menu P5and P6)P menus P1, P2 and P9 can be accessed by the user,mainly to read statuses and set time delays. The re-maining P menus P3 to P8 are intended solely forthe installer.The ComfoAir's bypass valve will not workfor the first 4 minutes after a power cut un-less the programme mode is activated.2.7.1 Display on the unitThe ComfoAir can be operated and commissionedby means of a display. The display is a digital op-erating device which is mounted on the ComfoAir.select menu upOK downsupply off supply on(led green) (led green)comfort temperatureShown in displayVentilation setting absentVentilation setting lowVentilation setting mediumVentilation setting highMenu symbolMalfunction code (flashes)BypassAccess to the menusSe-quencePress Display Description1 MENU P2 Time delay2 s + ▼(3 seconds)P3 Press the buttonssimultaneously.3 s P4 Temperatures4 s P5 Settings5 s P6 Settings6 s P7 Malfunction / Reset /Self-test7 s P8 0 - 10V Inputs8 s P9 StatusExampleSetting the MEDIUM POSITION of the supply fan to40%.Se-quencePress Display Description1 MENU P2 Time delay2 s + ▼(3 seconds) P3 Press the buttonssimultaneously.3 OK P30 Exhaust fanPosition A4 s (6x) P36 Select P365 OK 50 Current setting6▼ (10 x orpress con-tinuously)40 Select 407 OK P35 Value is 408 MENU P39 MENU 1 Fan settingSome P menus (such as P1 and P9) can onlybe read.Leaving Reading menu■ At action point 6 press "MENU" (instead of"OK").The display can not be used for setting theventilation positions of the ComfoAir. Thearrowkeys are only for setting the additionalprogrammes.OKMENU···OKMENU···OKMENU···OKMENU···OKMENU···1A23X XX X•1A23X XX X•1A23X XX X•1A23X XX X•1A23X XX X•1A23X XX X•1A23X XX X•