Zeiss Axiovert 100 Operating Manual

Zeiss Axiovert 100 Operating Manual Manual pdf 31 page image

3D MicroscopyAxiovert 100/135/135 M Eypiece and monitor versionB 40-022-4 e 09/98 314.2 ObservationThis is a combination of the eyepiece and themonitor version. The image is 3-dimensionalwhen you look through the eyepiece or on themonitor.4.2.1 Eyepiece observation Set the beam path to observation on thestand Set the 3D VIS mode via the rotary switchof the 3D-CONTROL DAS-3 control unit Place the required object on the stage,focus on it, set Köhler illumination andadjust theaperture diaphragm until optimum 3Dcontrast is achieved;the image appears 3-dimensional throughthe eyepiece4.2.2 Monitor observation Switch beam path to Camera/TV on thestand Set the 3D VIDEO mode via the rotaryswitch of the 3D-CONTROL DAS-3 controlunit Place the required object on the stage andfocus on it;the image on the monitor is 2-dimensionalfirst If the image is reversed, turn the cameraaround 180° Wear polarizing glasses;the image on the monitor is 3-dimensional Use a familiar object to check whether theimage is upright;if the image is not upright, switch to ScopeLCD in the RESET MENU of the MCU IIcontrol unit Focus depending on the object;adjust aperture diaphragm until optimum3D contrast is achieved

/ 32

Related manuals for Zeiss Axiovert 100