Zeiss Axiovert 100 Operating Manual

Zeiss Axiovert 100 Operating Manual Manual pdf 4 page image

Notes on safety 3D Microscopy4 B 40-022-4 e 07/981 Notes on safety1.1 GeneralPlease make yourself familiar with the contentsof these operating instructions beforeattaching and starting up the components for3D microscopy. Additional information isavailable from our maintenance service or fromauthorized agencies.For the function of 3D microscopy incombination with the Axiotron 2 Axiotech 100 Axiotech 100 vario Axiovert 100/135/135 M Axiovert 25 CA Axioplan 2/Axiophot 2 Axioskop Axioskop 2please see the operating instructions of thesemicroscopes.When using video components from KAPPA,please comply with the supplied manual "ColorTV camera for microscopy and 3D images".Special regard must be paid to the notes oninstrument safety included in this manual.To guarantee the safe operation and functionof the components for 3D microscopy, it isnecessary under any circumstances to take theprecaution measures and observe the warningscontained in the operating instructions.The following symbols are used for thewarnings:Caution!Non-observance of the safety notes constitutesa hazard for the user.Caution!Non-observance of the safety notes constitutesa hazard for the instrument.Caution!Disconnect the instrument from the line beforeopening it.+ Note!Notes which must be observed.1.2 Regulations concerninginstrument safety andelectromagneticcompatibility (EMC)The components for 3D microscopy have beendesigned and tested in compliance with EN61010, Part 1 (VDE 0411). From the safetyviewpoint, they left the factory in a perfectstate.They meet the requirements of the EC directive89/336/EC and the EMC legislation ofNovember 9th 1992 and the legal regulationsfor accident prevention.The components for 3D microscopy meet theEC requirements and are CE-labelled.