Instructions for Use 5 OperationCLARUS 500 5.2 Managing Data2660021165005 Rev. A 2017-08 43 / 1447. Enter a reason for the merge, then select Merge again.ð The exam data from the duplicate patient record is addedto the original patient record.5.2.1.3 Reassigning Test DataIf you inadvertently select the wrong patient record at the begin-ning of an exam, you can reassign the data to the correct patientrecord.Prerequisite þ The FORUM test database must be disabled in the Report Out-put settings. Refer to Configure Automatic End of Test Reports.Action 1. In the Patient window, search for the patient record that wasincorrectly associated with the data. See Search for a PatientRecord.2. Select the patient record, then open the drop-down menu byclicking on the down arrow. Select Exam.3. Select the data to reassign, then select Reassign.4. In the search field, type a few letters of the name, ID number,or DOB of the patient record the data should be assigned to,then click the Search button.5. Select the patient record, then select Next.6. Enter a reason for moving the data and select Reassign Test.5.2.1.4 Deleting a Patient RecordNOTE Only Administrators can complete this task.Patients deleted on the instrument are not deleted from the EMRsystem.Prerequisite þ The instrument is not connected to FORUM or any other EMRsystem.
