Zeiss HFA3 Quick Start Manual

Quickstart GuideSocial distancing with your ZEISS HFA3: Extended cable connectionThis Quickstart Guide provides an overview on how to set up and operate the ZEISS HFA device using an extended cableconnection. This option is intended for the Operator and Patient to be physically separated while allowing operationat a safe distance. You will need a table, monitor, extended cable, keyboard, and mouse.What you’ll need forextended connection• Additional video display- Standard Monitor, TV, or Projector capable of handling1024x768 video resolution, 60Hz refresh rate, with oneof the video display interfaces described below.• Monitor cable: recommend limit length to 5 meters, or less- HFA3 side: Passive DisplayPort or VGA.- Monitor side: appropriate connection foradditional monitor.• USB keyboard and mouse - choice of: wireless or wired.• Extender to achieve social distance length if usingwired option.Disclaimers• The following suggestions are not intended as a comprehensive solution for managing the clinical workflow in ophthalmic offices as related toCOVID-19 virus (or similar) management.• Any cables used for connecting additional video displays and extended peripherals should be routed and safely secured to avoid any potentialtripping hazards.• With the exception of peripherals available from ZEISS with the HFA, specific video display devices and peripherals are not guaranteed to have beentested or verified by ZEISS. Some video displays may require adjustment of the native display graphics configuration.• It is recommended that the lengths of any extension cables used are limited to a maximum of six meters (19.7 ft) to ensure reliability.• All periphery devices are not sold by ZEISS and is customer responsiblity.6 ft. safe distanceExtended set-up using cable connection

/ 3

Related manuals for Zeiss HFA3